Julián
Alcalá González

Ingeniero de Caminos, Canales y Puertos · Doctor en Ingeniería de la Construcción

Docencia, investigación y transferencia en ingeniería de la construcción, estructuras, optimización y gestión de infraestructuras.

+20 años de docencia universitaria
+290 trabajos académicos dirigidos
45 publicaciones en revistas JCR
12 proyectos de I+D competitivos
4 tesis doctorales dirigidas
+130 actuaciones profesionales

Actividad académica y profesional

Explora por áreas

Ingeniería construida

Algunos proyectos

Una selección visual de actuaciones incluidas en la trayectoria profesional.

Curriculum vitae completo

Trayectoria detallada

Los apartados siguientes conservan la información completa de la web original. Las subsecciones se pueden desplegar y contraer para facilitar la consulta.

Formación académica

Ingeniero de Caminos, Canales y Puertos

Universitat Politècnica de Valencia
Promoción 1992
Especialidad: Cimientos y Estructuras

Doctor en Ingeniería de la Construcción

Tesis Doctoral: Optimización heurística económica de tableros de puentes losa pretensados
Leída el 29 de Enero de 2010 en la Universitat Politècnica de Valencia,
dirigida por los doctores Fernando González Vidosa y Víctor Yepes Piqueras
Calificación: SOBRESALIENTE CUM LAUDE

Tribunal:

Docencia

Puestos ocupados

CATEGORÍA FECHA INICIO FECHA FIN
PROFESOR TITULAR DE UNIVERSIDAD 03/12/2021 - -
PROFESOR CONTRATADO DOCTOR 10/10/2011 02/12/2021
PROFESOR COLABORADOR 05/06/2007 09/10/2011
PROFESOR AYUDANTE 08/02/2005 04/06/2007
PROFESOR ASOCIADO (ASO-2) 01/10/2001 07/02/2005
PROFESOR ASOCIADO (ASO-1) 09/03/2001 30/09/2001

Docencia impartida

TITULACIÓN ASIGNATURA CURSO
GRADO EN INGENIERÍA CIVIL Procedimientos de Construcción (I) (14841)
2025/26
Procedimientos de Construcción (I) (12815)
2011/12
Procedimientos de Construcción (II) (12816)
2023/24
2022/23
2021/22
2020/21
2019/20
2012/13
2011/12
Gestión del Mantenimiento de Infraestructuras (12869)
2025/26
2024/25
2023/24
2022/23
2021/22
2020/19
2019/20
2018/19
GRADO EN INGENIERÍA DE OBRAS PÚBLICAS Tipologías y Procedimientos de las Construcciones (I) (12502)
2018/19
2011/12
Tipologías y Procedimientos de las Construcciones (II) (12505)
2018/19
2012/13
2011/12
Instalación, Organización y Garantía de Calidad de Obras (12815)
2024/25
2023/24
2022/23
2021/22
2020/21
2018/19
2015/16
2013/14
GRADO EN GESTIÓN DEL TRANSPORTE Y LA LOGÍSTICA Sostenibilidad, Calidad y Seguridad (14726)
2023/24
GRADO EN INGENIERÍA AEROESPACIAL Construcción de Aeropuertos (7370)
2010/11
MÁSTER UNIVERSITARIO EN INGENIERÍA DE CAMINOS, CANALES Y PUERTOS Gestión de empresas (33547)
2023/24
2022/23
MÁSTER UNIVERSITARIO EN PLANIFICACIÓN Y GESTIÓN
EN INGENIERÍA CIVIL
Calidad, Innovación y Sostenibilidad en el Sector de la Construcción (35994)
2025/26
Calidad, Innovación y Sostenibilidad en el Sector de la Construcción (35335)
2024/25
2023/24
2022/23
Gestión Estratégica de la Calidad y la Sostenibilidad en la Construcción (31836)
2021/22
2020/21
2019/20
2018/19
2017/18
2016/17
2015/16
Gestión de la Calidad en la Construcción (31836)
2014/15
2013/14
2012/13
2011/12
2010/11
Garantía de Calidad (31836)
2009/10
Planificación y Programación (35999)
2025/26
Planificación y Administración de Obras (35339)
2024/25
2023/24
2022/23
Técnicas de Programación de Proyectos (32253)
2021/22
2020/21
2019/20
2018/19
2017/18
2016/17
2015/16
2014/15
2013/14
2012/13
2011/12
2010/11
Gestión de Proyectos (31834)
2009/10
MASTER UNIVERSITARIO EN INGENIERÍA DEL HORMIGÓN Modelos Predictivos y de Optimización de Estructuras de Hormigón (32755)
2025/26
2024/25
2023/24
2022/23
2021/22
2020/21
2019/20
2018/19
2017/18
2016/17
2015/16
2014/15
2013/14
2012/13
Optimización Heurística de Estructuras de Hormigón (31429)
2011/12
Ejecución y Control de Estructuras de Hormigón (32762)
2017/18
2016/17
2015/16
2014/15
2013/14
Ejecución de Estructuras y Puentes de Hormigón (31422)
2012/13
2011/12
2010/11
2009/10
2008/09
INGENIERÍA DE CAMINOS, CANALES Y PUERTOS
(Plan 1997)
Procedimientos de Construcción (4729)
2009/10
2008/09
2007/08
2006/07
Garantía de Calidad (5607)
2010/11
2009/10
INGENIERÍA TÉCNICA DE OBRAS PÚBLICAS
(Plan 1997)
Procedimientos de Construcción (3376)
2012/13
2009/10
2008/09
2007/08
2006/07
Garantía de Calidad (3504)
2010/11
2009/10
INGENIERÍA DE CAMINOS, CANALES Y PUERTOS
INGENIERÍA TÉCNICA DE OBRAS PÚBLICAS (Plan 1997)
Geometría Descriptiva y Métrica (3353)
2004/05
2003/04
2002/03
2001/02
2000/01
Dibujo Técnico (3346)
2004/05
2003/04
2002/03
2001/02

Publicaciones Docentes

Técnicas de voladuras y excavación en túneles.
Martí Albiñana, José Vicente; Yepes Piqueras, Víctor; González Vidosa, Fernando; Alcalá González, Julián; Escuela Técnica Superior de Ingenieros de caminos, Canales y Puertos | Valencia : Editorial UPV, D.L. 2012. Ref. 530, 165 pp.
Técnicas de Planificación y Control de Obras.
Yepes Piqueras, Víctor; Martí Albiñana, José Vicente; González Vidosa, Fernando; Alcalá González, Julián; Escuela Técnica Superior de Ingenieros de caminos, Canales y Puertos | Valencia : Editorial UPV, D.L. 2012, 2015. Ref. 189, 94 pp.
Maquinaria Auxiliar y Equipos de Elevación.
Yepes Piqueras, Víctor; Martí Albiñana, José Vicente; González Vidosa, Fernando; Alcalá González, Julián; Escuela Técnica Superior de Ingenieros de caminos, Canales y Puertos | Valencia: Editorial UPV, D.L. 2012. Ref. 814, 202 pp.
Temas de Procedimientos de Construcción: Técnicas para la Mejora de Terrenos.
González Vidosa, Fernando; Yepes Piqueras, Víctor; Martí Albiñana, José Vicente; Alcalá González, Julián; Universidad Politécnica de Valencia. Departamento de Ingeniería de la Construcción y de Proyectos de Ingeniería Civil | Valencia : Universidad Politécnica de Valencia, 2011. Ref. 753, 60 pp.
Temas de Procedimientos de Construcción. Cables y Maquinaria de Elevación.
González Vidosa, Fernando; Yepes Piqueras, Víctor; Martí Albiñana, José Vicente; Alcalá González, Julián; Universidad Politécnica de Valencia. Departamento de Ingeniería de la Construcción y de Proyectos de Ingeniería Civil | Valencia : Editorial UPV, 2004, 2007, 2010. Ref. 522, 61 pp.
Procedimientos de Construcción. Fabricación, Transporte y Colocación de Hormigones.
González Vidosa, Fernando; Yepes Piqueras, Víctor; Martí Albiñana, José Vicente; Alcalá González, Julián; Universidad Politécnica de Valencia. Departamento de Ingeniería de la Construcción y de Proyectos de Ingeniería Civil | Valencia : Editorial UPV, 2007. Ref. 613, 68 pp.
Equipos de Dragado. Temas de Procedimientos de Construcción.
González Vidosa, Fernando; Yepes Piqueras, Víctor; Martí Albiñana, José Vicente; Alcalá González, Julián; Clemente Tirado, Juan José; Universidad Politécnica de Valencia. Departamento de Ingeniería de la Construcción y de Proyectos de Ingeniería Civil | Valencia : Editorial UPV, 2006. Ref. 438, 74 pp.
Temas de Procedimientos de Construcción. Equipos de Movimiento y Transporte de Tierras
González Vidosa, Fernando; Yepes Piqueras, Víctor; Martí Albiñana, José Vicente; Alcalá González, Julián; Universidad Politécnica de Valencia. Departamento de Ingeniería de la Construcción y de Proyectos de Ingeniería Civil | Valencia : Universidad Politécnica de Valencia, 2008. Ref. 738, 119 pp.

Apuntes de procedimientos de construcción

Apuntes de programación de proyectos

Participación en Congresos Docentes:

  1. GARRIDO DE LA TORRE, E.; PÉREZ ZURIAGA, A.M.; CAMACHO TORREGROSA, F.J.; ANDRÉS DOMENECH, I.; ROMERO GIL, I.; ALCALÁ GONZÁLEZ, J.; ALBENTOSA HERNÁNDEZ, E., COLL CARRILLO, H. (2016) TFG multidisciplinar en el área de la Ingeniería Civil. Jornadas Red Estatal de Docencia Universitaria (RED-U), pp. 189-195. UNED Madrid, 10 y 11 de Noviembre.
  2. CAMACHO TORREGROSA, F.J.; PÉREZ ZURIAGA, A.M.; COLL CARRILLO, H.; ALCALÁ GONZÁLEZ, J.; ROMERO GIL, I.; GARRIDO DE LA TORRE, E. (2015). Desarrollo de un Trabajo de Fin de Grado Multidisciplinar en Ingeniería Civil como preparación del alumno para la vida profesional. Congreso Nacional de Innovación Educativa y Docencia en Red (IN-RED), pp. 1249-1263. Valencia, 30 de Junio y 1 de Julio. DOI: http://dx.doi.org/10.4995/INRED2015.2015.1635
  3. GIMÉNEZ, E.; SANZ, A.; LOZANO, A.; MARTÍ-VARGAS, J.R.; ALCALÁ, J.; CATALÁ, J.; CORTÉS, R.; LOZANO, J.F. (2014) La introducción de la responsabilidad profesional en los estudios de Grado en Ingeniería en Obras Públicas. Jornadas de Innovación Educativa y Docencia en Red (IN-RED), pp. 1166-1175. Valencia, 15 y 16 de julio de 2014.
  4. YEPES PIQUERAS, V.; ALCALÁ GONZÁLEZ, J.; MARTÍ ALBIÑANA, J.V.; GONZÁLEZ VIDOSA, F. (2013) Cómo predimensionar muros óptimos sin calculadora usando la inteligencia artificial. 2º Congreso Nacional sobre la Enseñanza de las Matemáticas en Ingeniería de Edificación (EMIE), pp. 119-134. Valencia, 18 y 19 de Julio.
  5. BARCENA SAIZ, A.; YEPES PIQUERAS, V.; ALCALÁ GONZÁLEZ, J.; MARTÍ ALBIÑANA, J.V. (2013) Diseño automático de forjados de chapa nervada optimizados con criterios de economía y sostenibilidad. 2º Congreso Nacional sobre la Enseñanza de las Matemáticas en Ingeniería de Edificación (EMIE), pp. 159-172. Valencia, 18 y 19 de Julio.
  6. MARTÍ ALBIÑANA, J.V.; YEPES PIQUERAS, V.; ALCALÁ GONZÁLEZ, J.; GARCÍA SEGURA, T. (2013) Diseño de vigas en U de hormigón con fibras mediante la heurística SA con criterios económicos. 2º Congreso Nacional sobre la Enseñanza de las Matemáticas en Ingeniería de Edificación (EMIE), pp. 299-309. Valencia, 18 y 19 de Julio.
  7. YEPES PIQUERAS, V.; MARTÍ ALBIÑANA, J.V.; ALCALÁ GONZÁLEZ, J.; GARCÍA SEGURA, T. (2013)Métodos empleados en el Proyecto HORSOST sobre diseño sostenible con hormigón no convencional. 2º Congreso Nacional sobre la Enseñanza de las Matemáticas en Ingeniería de Edificación (EMIE), pp. 259-272. Valencia, 18 y 19 de Julio.
  8. RODRIGUEZ-CALDERITA FACUNDI, A.M.; ALCALÁ GONZÁLEZ, J.; YEPES PIQUERAS, V.; MARTÍ ALBIÑANA, J.V. (2013) Optimización heurística aplicada al diseño automático de forjados de losa postesa. 2º Congreso Nacional sobre la Enseñanza de las Matemáticas en Ingeniería de Edificación (EMIE), pp. 63-75. Valencia, 18 y 19 de Julio.
  9. MARTÍ ALBIÑANA, J.V.; YEPES PIQUERAS, V.; ALCALÁ GONZÁLEZ, J.; GARCÍA SEGURA, T. (2013) Optimización memética de vigas artesa prefabricadas con criterios sostenibles de hormigón con fibras. 2º Congreso Nacional sobre la Enseñanza de las Matemáticas en Ingeniería de Edificación (EMIE), pp. 91-104. Valencia, 18 y 19 de Julio.
  10. GARCÍA SEGURA, T.; YEPES PIQUERAS, V.; ALCALÁ GONZÁLEZ, J.; MARTÍ ALBIÑANA, J.V. Optimización multiobjetivo de viga en I de hormigón armado con criterios sostenibles. 2º Congreso Nacional sobre la Enseñanza de las Matemáticas en Ingeniería de Edificación (EMIE). pp. 135-148. Valencia, 18 y 19 de Julio.
  11. YEPES, V.; GONZÁLEZ-VIDOSA, F.; MARTÍ, J.V.; ALCALÁ, J. (2011) A short postgraduate course on heuristic design of prestressed concrete road bridge deks. 5th International Technology, Education and Development Conference. ISBN: 978-84-614-7423-3; ISSN: 2340-1079. Pp. 5132-5141. Editor: IATED. 7-9 March, Valencia, Spain.
  12. TORRES-MACHÍ, C.; YEPES, V.; ALCALÁ, J.; PELLICER, E. (2012). Optimización heurística de estructuras de hormigón armado de alta resistencia. III Jornadas de Modelización Matemática, 7-8 junio, Gandía (España).
  13. GONZÁLEZ-VIDOSA, F.; YEPES, V.; ALCALÁ, J.; PEREA, C.; MARTÍNEZ, F. (2007). A postgraduate course on heuristic design of reinforced concrete structures. International Technology, Education and Development Conference INTED 2007. Abstracts Book pp 314. ISBN: 978-84-611-4516-4. Proceedings CD, 12 pp., ISBN: 978-84-611-4517-1. Editor: IATED. March, Valencia, Spain.

Trabajos de fin de título dirigidos

Participación de proyectos de innovación docente:

Investigación



Tres (3) tramos de investigación concedidos.

ORCID: 0000-0003-1376-8441

Research ID: L-1774-2014 (Web of Science)

Códigos UNESCO:

305 TECNOLOGÍA DE LA CONSTRUCCIÓN:
  • 3305.04 PUENTES
  • 3305.05 TECNOLOGIA DEL HORMIGON
  • 3305.06 INGENIERIA CIVIL
  • 3305.10 CIMIENTOS
  • 3305.24 CONSTRUCCIONES PREFABRICADAS
  • 3305.25 HORMIGON PRETENSADO
  • 3305.32 INGENIERIA DE ESTRUCTURAS

Publicaciones en revistas JCR:

  1. ZHOU, Z.; DING, F.; ALCALÁ, J.; YEPES, V. (2026). Thermal damage and lifespan deterioration of global infrastructure under climate warming. Thermal Science and Engineering Progress, (accepted, in press).
  2. YEPES-BELLVER, L.; ALCALÁ, J.; YEPES, V. (2026). Multicriteria Analysis of Cost, CO2 Emissions, and Embodied Energy for Post-tensioned Slab Bridges Using the CRITIC Method. Hormigón y Acero, DOI:10.33586/hya.2026.4176
  3. RUIZ-VÉLEZ, A.; SÁNCHEZ-GARRIDO, A.J.; ALCALÁ, J.; YEPES, V. (2026). Life-cycle environmental and social trade-offs in concrete road frame systems. Cleaner Environmental Systems, 22, 100462. DOI:10.1016/j.cesys.2026.100462
  4. ZHOU, Z.; ZHAO, Z.; ALCALÁ, J.; YEPES, V. (2025). Intelligent operation monitoring and finite element coupled identification of hyperstatic structures. Results in Engineering, DOI:10.1016/j.rineng.2025.106990
  5. YEPES-BELLVER, L.; ALCALÁ, J.; YEPES, V. (2025). Predictive modeling for carbon footprint optimization of prestressed road flyovers. Applied Sciences, 15(17), 9591. DOI:10.3390/app15179591
  6. ZHOU, Z.; TIAN, Q.; ALCALÁ, J.; YEPES, V. (2025). Research on the coupling of talent cultivation and reform practice of higher education in architecture. Computers and Education Open, DOI:10.1016/j.caeo.2025.100268
  7. ZHOU, Z.; WANG, Y.; YEPES-BELLVER, L.; ALCALÁ, J.; YEPES, V. (2025). Intelligent monitoring of loess landslides and research on multi-factor coupling damage. Geomechanics for Energy and the Environment 42, 100692. DOI:https://doi.org/10.1016/j.gete.2025.100692
  8. ZHOU, Z.; YEPES-BELLVER, L.; ALCALÁ, J.; YEPES, V. (2025). Study on the Failure Mechanism of Deep Foundation Pit of High-Rise Building: Comprehensive Test and Microstructure Coupling. Infrastructures, 10(2): 43. DOI:https://doi.org/10.3390/buildings15081270
  9. YEPES-BELLVER, L.; BRUN-IZQUIERDO, A.; ALCALÁ, J.; YEPES, V. (2025). Surrogate-assisted cost optimization for post-tensioned concrete slab bridges. Infrastructures, 10(2): 43. DOI:10.3390/infrastructures10020043
  10. YUJUN, L.; ZHOU, Z.; ALCALÁ, J.; YEPES, V. (2025). Research on spatial deformation monitoring and numerical coupling of deep foundation pit in soft soil. Journal of Building Engineering, 99:111636. DOI:10.1016/j.jobe.2024.111636
  11. ZHOU, Z.; LIANG, Z.; ALCALÁ, J.; YEPES, V. (2024). Three-dimensional finite element coupled optimization assessment of extra-large bridges. Structures, 70:107743. DOI:10.1016/j.istruc.2024.107743
  12. YEPES-BELLVER, L.; BRUN-IZQUIERDO, A.; ALCALÁ, J.; YEPES, V. (2024). Artificial neural network and Kriging surrogate model for embodied energy optimization of prestressed slab bridges. Sustainability, 16(19), 8450. DOI:10.3390/su16198450
  13. RUIZ-VÉLEZ, A.; GARCÍA, J.; PARTSKHALADZE, G.; ALCALÁ, J.; YEPES, V. (2024). Enhanced Structural Design of Prestressed Arched Trusses through Multi-Objective Optimization and MCDM. Mathematics, 12(16), 2567. DOI:10.3390/math12162567
  14. ZHOU, Z.; WANG, Y.; ALCALÁ, J.; YEPES, V. (2024). Research on coupling optimization of carbon emissions and carbon leakage in international construction projects. Scientific Reports, 14: 10752. DOI:10.1038/s41598-024-59531-4
  15. RUIZ-VÉLEZ, A.; GARCÍA, J.; ALCALÁ, J.; YEPES, V. (2024). Enhancing Robustness in Precast Modular Frame Optimization: Integrating NSGA-II, NSGA-III, and RVEA for Sustainable Infrastructure. Mathematics, 12(10):1478. DOI:10.3390/math12101478
  16. RUIZ-VÉLEZ, A.; GARCÍA, J.; ALCALÁ, J.; YEPES, V. (2024). Sustainable road infrastructure decision-making: Custom NSGA-II with repair operators for multi-objective optimization. Mathematics, 12(5):730 DOI:10.3390/math12050730
  17. NAVARRO, I.J.; VILLALBA, I.; YEPES-BELLVER, L.; ALCALÁ, J. (2024) Social life cycle assessment of railway track substructure alternatives. Journal of Cleaner Production, 450: 142008. DOI:10.1016/j.jclepro.2024.142008
  18. ZHOU, Z.; ZHOU, J.; ZHANG, B; ALCALÁ, J.; YEPES, V. (2024). The centennial sustainable assessment of regional construction industry under the multidisciplinary coupling model. Sustainable Cities and Society (11)1 - 21.DOI: 10.1016/j.scs.2024.105201
  19. ZHOU, Z.; ZHOU, J.; ALCALÁ, J.; YEPES, V. (2024). Thermal coupling optimization of bridge environmental impact under natural conditions. Environmental Impact Assessment Review, 104:107316. DOI:10.1016/j.eiar.2023.107316
  20. YEPES-BELLVER, L.; BRUN-IZQUIERDO, A.; ALCALÁ, J.; YEPES, V. (2023). Embodied energy optimization of prestressed concrete road flyovers by a two-phase Kriging surrogate model. Materials, 16(20); 6767. DOI:10.3390/ma16206767
  21. ZHOU, Z.; ALCALÁ, J.; YEPES, V. (2023). Carbon impact assessment of bridge construction based on resilience theory. Journal of Civil Engineering and Management, 29(6):561-576. DOI:10.3846/JCEM.2023.19565
  22. ZHOU, Z.; ALCALÁ, J.; YEPES, V. (2023). Experimental Research on Diseases of Emulsified Asphalt Mortar Board for Ballastless Tracks. Journal of Materials in Civil Engineering, 35(6):04023156. DOI:10.1061/JMCEE7.MTENG-15149
  23. RUIZ-VÉLEZ, A.; ALCALÁ, J.; YEPES, V. (2023) A parametric study of optimum road modular hinged frames by hybrid metaheuristics. Materials, 16(3):931. DOI:10.3390/ma16030931
  24. RUIZ-VÉLEZ, A.; ALCALÁ, J.; YEPES, V. (2022) Optimal design of sustainable reinforced concrete precast hinged frames. Materials, 16(1):204. DOI:10.3390/ma16010204
  25. PARTSKHALADZE, G.; ALCALÁ, J.; MEDZMARIASHVILI, E.; CHAVLESHVILI, G.; SURGULADZE, B., I.; YEPES, V. (2022). Heuristic Optimization of a New Type Prestressed Arched Truss. Materials, 15(22): 8144. DOI:10.3390/ma15228144
  26. ZHOU, Z.; ALCALÁ, J.; YEPES, V. (2022) Research on the optimized environment of large bridges based on multi-constraint coupling. Environmental Impact Assessment Review, 97:106914. DOI:10.1016/j.eiar.2022.106914
  27. YEPES-BELLVER, L.; BRUN-IZQUIERDO, A.; ALCALÁ, J.; YEPES, V. (2022). CO₂-optimization of post-tensioned concrete slab-bridge decks using surrogate modeling. Materials, 15(14):4776. DOI:10.3390/ma15144776
  28. MARTÍNEZ-MARTÍN, F.J.; YEPES, V.; GONZÁLEZ-VIDOSA, F.; HOSPITALER, A.; ALCALÁ, J. (2022). Optimization design of RC elevated water tanks under seismic loads. Applied Sciences, 12(11):5635. DOI:10.3390/app12115635
  29. ZHOU, Z.; ALCALÁ, J.; YEPES, V. (2022). Regional sustainable development impact through sustainable bridge optimization. Structures, 41, 1061-1076. DOI: 10.1016/j.istruc.2022.05.047
  30. ZHOU, Z.; ALCALÁ, J.; YEPES, V. (2021). Optimized application of sustainable development strategy in international engineering project management. Mathematics, 9(14):1633. DOI:10.3390/math9141633
  31. ZHOU, Z.; ALCALÁ, J.; KRIPKA, M.; YEPES, V. (2021). Life cycle assessment of bridges using Bayesian Networks and Fuzzy Mathematics. Applied Sciences, 11(11):4916. DOI:10.3390/app11114916
  32. ZHOU, Z.; ALCALÁ, J.; YEPES, V. (2021). Environmental, economic and social impact assessment: study of bridges in China’s five major economic regions. International Journal of Environmental Research and Public Health, 18(1):122. DOI:10.3390/ijerph18010122
  33. ZHOU, Z.; ALCALÁ, J.; YEPES, V. (2020). Bridge Carbon Emissions and Driving Factors Based on a Life-Cycle Assessment Case Study: Cable-Stayed Bridge over Hun He River in Liaoning, China. International Journal of Environmental Research and Public Health, 17(16):5953. DOI:10.3390/ijerph17165953
  34. PARTSKHALADZE, G.; MSHVENIERADZE, I.; MEDZMARIASHVILI, E.; CHAVLESHVILI, G.; YEPES, V.; ALCALÁ, J. (2019). Buckling Analysis and Stability of Compressed Low Carbon Steel Rods in Elasto-Plastic Region of Material. Advances in Civil Engineering, 2019: 7601260. DOI:10.1155/2019/7601260
  35. GARCÍA-SEGURA, T.; YEPES, V.; ALCALÁ, J.; PÉREZ-LÓPEZ, E. (2015). Hybrid harmony search for sustainable design of post-tensioned concrete box-girder pedestrian bridges. Engineering Structures, 92:112-122. DOI:10.1016/j.engstruct.2015.03.015
  36. GARCÍA-SEGURA, T.; YEPES, V.; MARTÍ, J.V.; ALCALÁ, J. (2014). Optimization of concrete I-beams using a new hybrid glowworm swarm algorithm. Latin American Journal of Solids and Structures, 11(7):1190–1205. DOI:10.1590/S1679-78252014000700007
  37. GARCÍA-SEGURA, T.; YEPES, V.; ALCALÁ, J. (2014). Life-cycle greenhouse gas emissions of blended cement concrete including carbonation and durability. International Journal of Life Cycle Assessment, 19(1):3-12. DOI:10.1007/s11367-013-0614-0
  38. TORRES-MACHÍ, C.; YEPES, V.; ALCALA, J.; PELLICER, E. (2013). Optimization of high-performance concrete structures by variable neighborhood search. International Journal of Civil Engineering, 11(2):90-99.
  39. MARTÍ, J.V.; GONZÁLEZ-VIDOSA, F.; YEPES, V.; ALCALÁ, J. (2013). Design of prestressed concrete precast road bridges with hybrid simulated annealing. Engineering Structures, 48:342-352. DOI:10.1016/j.engstruct.2012.09.014
  40. YEPES, V.; GONZÁLEZ-VIDOSA, F.; ALCALÁ, J.; VILLALBA, P. (2012). CO2-Optimization Design of Reinforced Concrete Retaining Walls based on a VNS-Threshold Acceptance Strategy. Journal of Computing in Civil Engineering, 26 (3):378-386. DOI:10.1061/(ASCE)CP.1943-5487.0000140
  41. MARTINEZ, F.J.; GONZÁLEZ-VIDOSA, F.; HOSPITALER, A.; (2011). Design of tall bridge piers by ant colony optimization. Engineering Structures, 33(8):2320-2329. DOI:10.1016/j.engstruct.2011.04.005
  42. PEREA, C.; YEPES, V.; ALCALÁ, J.; HOSPITALER, A.; GONZÁLEZ-VIDOSA, F. (2010). A parametric study of optimum road frame bridges by threshold acceptance. Indian Journal of Engineering & Materials Sciences, 17(6):427-437.
  43. YEPES, V.; DÍAZ, J.; GONZÁLEZ-VIDOSA, F.; ALCALÁ, J. (2009). Statistical Characterization of Prestressed Concrete Road Bridge Decks. Revista de la Construcción, 8(2):95-109.
  44. YEPES, V.; ALCALÁ, J.; PEREA, C.; GONZÁLEZ-VIDOSA, F. (2008). A Parametric Study of Optimum Earth Retaining Walls by Simulated Annealing. Engineering Structures, 30(3): 821-830. DOI:10.1016/j.engstruct.2007.05.023
  45. PEREA, C.; ALCALÁ, J.; YEPES, V.; GONZÁLEZ-VIDOSA, F.; HOSPITALER, A. (2008). Design of Reinforced Concrete Bridge Frames by Heuristic Optimization. Advances in Engineering Software, 39(8): 676-688. DOI:10.1016/j.advengsoft.2007.07.007

Otras publicaciones

  1. YEPES, V.; PÉREZ-LÓPEZ, E.; GARCÍA-SEGURA, T.; ALCALÁ, J. (2019). Optimization of high-performance concrete post-tensioned box-girder pedestrian bridges. International Journal of Computational Methods and Experimental Measurements, 7(2):118-129. DOI: 10.2495/CMEM-V7-N2-118-129
  2. YEPES, V.; PÉREZ-LÓPEZ, E.; ALCALÁ, J.; GARCÍA-SEGURA, T. (2018). Parametric study of concrete box-girder footbridges. Journal of Construction Engineering, Management & Innovation, 1(2):67-74. doi:10.31462/jcemi.2018.01067074
  3. ALCALÁ, J.; GONZÁLEZ-VIDOSA, F.; YEPES, V.; MARTÍ, J.V. (2018). Embodied energy optimization of prestressed concrete slab bridge decks. Technologies, 6(2):43. doi:10.3390/technologies6020043
  4. GARCÍA-SEGURA, T.; YEPES, V.; ALCALÁ, J. (2017). Computer-support tool to optimize bridges automatically. International Journal of Computational Methods and Experimental Measurements, 5(2):171-178.
  5. TORRES-MACHÍ, C.; YEPES, V.; ALCALÁ, J.; PELLICER, E. (2013). Integración de investigación y docencia de posgrado a través del diseño eficiente de estructuras. MSEL–Modelling in Science Education and Learning, 6(3), No.8. ISSN: 1988-3145.
  6. YEPES, V.; ALCALÁ, J.; DÍAZ, J.; GONZÁLEZ-VIDOSA, F. (2011). Morfología de tableros aligerados de canto constante postesados para puentes carreteros y ferroviarios. Ingeniería Civil, 161:61-72. [Post-stressed constant depth beam concrete road and railway bridge voided decks morphology].
  7. CARBONELL, A.; ALCALÁ, J.; GONZÁLEZ-VIDOSA, F.; YEPES, V. (2007). Optimización heurística de bóvedas de hormigón armado para pasos de carreteras. Ingeniería Civil, 145: 79-88. ISSN: 0213-8468
  8. YEPES, V.; ALCALÁ, J.; PEREA, C.; GONZÁLEZ-VIDOSA, F. (2006). Estudio paramétrico de muros óptimos de contención de hormigón armado. Ingeniería Civil, 142: 129-139. ISSN: 0213-8468. [A parametric study of optimum reinforced concrete retaining walls].
  9. CARRERA, J.M.; ALCALÁ, J.; YEPES, V.; GONZÁLEZ-VIDOSA, F. (2005). Optimización heurística de pórticos de paso de carretera de hormigón armado. Hormigón y Acero, 236: 85-95. ISBN: 0439-5689.
  10. ALCALÁ, J.; CARRERA, J.M.; GONZÁLEZ-VIDOSA, F.; YEPES, V. (2005). Cristalización simulada aplicada a la optimización económica de muros ménsula de contención de hormigón armado. Hormigón y Acero, 236: 97-108. ISBN: 0439-5689.

Participación en congresos

  1. GONZÁLEZ-VIDOSA, F.; ALCALÁ, J.; NAVARRO, F. (2020) On the structural design of characteristic decks for three-span postensioned road flyovers. 10th International Conference on High Performance and Optimum Design of Structures and Materials (HPSM/OPTI 2020)
  2. MOLINA-JOTEL, V.; ALCALÁ, J.; MARTÍ, J.V.; YEPES, V. (2017). Diseño de pasarelas de hormigón postesado de sección en T mediante optimización heurística bajo criterios económicos y de sostenibilidad. VII Congreso de ACHE, A Coruña, junio.
  3. YEPES, V.; GONZÁLEZ-VIDOSA, F.; MARTÍ, J.V.; ALCALÁ, J.; PELLICER, E. (2017). Puentes pretensados de alta eficiencia social y medioambiental bajo presupuestos restrictivos: Proyecto BRIDLIFE. VII Congreso de ACHE, A Coruña, junio.
  4. MARTÍ, J.V.; ALCALÁ, J.; GARCÍA-SEGURA, T.; YEPES, V. (2016). Heuristic design of precast-prestressed concrete U-beam and post-tensioned cast-in-place concrete slab road bridges. HPSM/OPTI 2016. WIT Transactions on The Built Environment, Vol 166. ISNB: 978-1-78466-143-4.
  5. GARCÍA-SEGURA, T.; YEPES, V.; MARTÍ, J.V.; ALCALÁ, J. (2015). Algoritmo híbrido de enjambre de luciérnagas y aceptación por umbrales para diseño de vigas. X Congreso Español de Metaheurísticas, Algoritmos Evolutivos y Bioinspirados – MAEB 2015, 4-6 de febrero, Mérida, pp. 699-705. ISBN: 978-84-697-2150-6.
  6. ALCALÁ, J.; YEPES, V.; MARTÍ, J.V.; BÁRCENA, A. (2014). Diseño automático de forjados mixtos con chapa nervada, basado en criterios de eficiencia energética y económicos. VI Congreso de ACHE, 3-5 de junio, Madrid. ISBN: 978-84-89670-80-8.
  7. ALCALÁ, J.; YEPES, V.; MARTÍ, J.V.; RODRÍGUEZ-FACUNDI, A. (2014). Optimización de forjados de losa pretensada utilizando criterios económicos y de sostenibilidad. VI Congreso de ACHE, 3-5 de junio, Madrid. ISBN: 978-84-89670-80-8.
  8. GARCÍA-SEGURA, T.; YEPES, V.; ALCALÁ, J. (2014). Sustainable design using multiobjective optimization of high-strength concrete I-beams. The 2014 International Conference on High Performance and Optimum Design of Structures and Materials HPSM/OPTI 2014, 9-11 June, Ostend, Belgium. WIT Transactions on The Built Environment, Vol 137, pp. 347-358. doi: 10.2495/HPSM140331 (link)
  9. GARCÍA-SEGURA, T.; YEPES, V.; ALCALÁ, J. (2014). Life-cycle emissions of reinforced concrete made with blended cements. 18th International Congress on Project Management and Engineering. 16-18 de julio, Alcañiz (Teruel), pp. 1-10. ISBN: 978-84-617-2742-1.
  10. GARCÍA-SEGURA, T.; YEPES, V.; ALCALÁ, J.; MARTÍ, J.V. (2014). Optimización multiobjetivo para el estudio de la sostenibilidad del hormigón autocompactante. VI Congreso de ACHE, 3-5 de junio, Madrid. ISBN: 978-84-89670-80-8.
  11. GARCÍA-SEGURA, T.; YEPES, V.; ALCALÁ, J.; MARTÍ, J.V. (2014). Influencia de la carbonatación y durabilidad en el ciclo de vida del hormigón fabricado con cementos con adiciones. VI Congreso de ACHE, 3-5 de junio, Madrid. ISBN: 978-84-89670-80-8.
  12. MARTÍ, J.V.; YEPES, V.; ALCALÁ, J.; GONZÁLEZ-VIDOSA, F. (2014). Diseño de tableros isostáticos de puentes de vigas artesa prefabricadas pretensadas con criterios económicos. VI Congreso de ACHE, 3-5 de junio, Madrid. ISBN: 978-84-89670-80-8.
  13. YEPES, V.; MARTÍ, J.V.; ALCALÁ, J.; GARCÍA-SEGURA, T. (2014). Diseño eficiente de estructuras con hormigones no convencionales basados en criterios sostenibles multiobjetivo: HORSOST. VI Congreso de ACHE, 3-5 de junio, Madrid. ISBN: 978-84-89670-80-8.
  14. ALCALÁ, J.; MARTÍ, J.V.; YEPES, V. (2013). CO2 optimization of precast-prestressed concrete road bridges with steel fiber-reinforcement. 5th International Congress on Energy and Environment Engineering and Management. Lisbon, 17-19 July 2013, CD. ISBN: 978-989-98406-5-2
  15. YEPES, V.; ALCALÁ, J.; GARCÍA-SEGURA, T. (2013). Multiobjective optimization of high-performance reinforced concrete I-beams by simulated annealing. 22nd International Conference on Multiple Criteria Decision Making, 17-21 June, Málaga, (Spain).
  16. MARTÍ, J.V.; ALCALÁ, J.; YEPES, V.; GONZÁLEZ-VIDOSA, F. (2012). Diseño heurístico de puentes de hormigón pretensado como ejemplo de docencia en posgrado. XVI Congreso Internacional de Ingeniería de Proyectos, AEIPRO, 11-13 de julio, Valencia, pp. 2345-2356
  17. MARTÍ, J.V.; YEPES, V.; GONZÁLEZ-VIDOSA, F.; ALCALÁ, J. (2012). CO2-Optimization of PC precast bridges by hybrid heuristics. SSCS 2012 Numerical Modeling. Strategies for Sustainable Concrete Structures, May 29-June 1, Aix-en-Provence, France.
  18. MARTÍ, J.V.; ALCALÁ, J.; YEPES, V. (2012). Diseño automatizado mediante optimización heurística de tableros de puentes pretensados: losas continuas aligeradas y vigas artesa prefabricadas. VI Congreso Nacional de la Ingeniería Civil, 23-24 de febrero, Valencia. ISNB: 978-84-380-0452-4.
  19. YEPES, V.; VILLALBA, P.; ALCALÁ, J.; GONZÁLEZ-VIDOSA, F. (2011). Energy consumption optimization design of prestressed concrete slab bridge decks, in Proceedings of 4th International Congress on Energy and Environment Engineering and Management, 26-27 May, Mérida (Spain), pp. 153. ISBN: 978-84-9978-014-6.
  20. YEPES, V.; ALCALÁ, J.; GONZÁLEZ-VIDOSA, F. (2011). Caracterización multifactorial de tableros aligerados de canto constante optimizados mediante técnicas heurísticas. V Congreso de ACHE, Barcelona, 10 pp.
  21. ALCALÁ, J.; VILLALBA, P.; YEPES, V.; GONZÁLEZ-VIDOSA, F. (2011). CO2 Optimization of Prestressed Concrete Slab Bridge Decks by Simulated Annealing, in Abstracts of Optimization 2011, Portuguese Operational Research Society, Lisbon, pp. 82.
  22. VILLALBA, P.; ALCALÁ, J.; YEPES, V.; GONZÁLEZ-VIDOSA, F. (2010). CO2 optimization of reinforced concrete cantilever retaining walls. Proceedings of the 2nd International Conference on Engineering Optimization, Lisbon, 6-9 September. 10 pp. CD-ROM. ISBN: 978-898-96264-3-0.
  23. PEREA, C.; YEPES, V.; ALCALÁ, J.; HOSPITALER, A.; GONZÁLEZ-VIDOSA, F. (2006). Heuristic optimization of reinforced concrete road bridge frames. Proceedings of the Eighth International Conference on Computational Structures Technology. Civil-Comp Press. Paper 208, 9 pp. Las Palmas, Spain. ISBN: 1-905088-08-6.
  24. PEREA, C.; ALCALÁ, J.; MARTÍNEZ, F.; YEPES, V.; GONZÁLEZ-VIDOSA, F. (2006). Optimum design of the box frame tunnel of the Underground Line Palma-UIB. Proceedings of the X International Conference on Project Engineering. Valencia, Spain. September, pp. 269-278. ISBN: 84-9705-987-5.
  25. GONZÁLEZ-VIDOSA, F.; YEPES, V.; ALCALÁ, J.; CARRERA, M.; PEREA, C. (2005). Simulated annealing optimization of walls, portal and box reinforced concrete road structures, in Hernández, S. and Brebbia, C.A. (ed.): Proceedings of 9th International Conference on Computed Aided Optimum Designed in Engineering (OPTI-2005). WIT Press, pp. 175-186. Skiathos (Greece), may 2005. ISBN: 1-84564-016-0. ISSN: 1746-4498 (print). (pdf)
  26. GONZÁLEZ-VIDOSA, F.; YEPES, V.; ALCALÁ, J.; CARRERA, M.; PEREA, C. (2005). Optimización por cristalización simulada de pórticos y marcos de paso de carretera. I Jornadas de Investigación en Construcción. Instituto de CC. “E. Torroja”. CSIC. Vol. I, pp. 373-381. Ed. AMIET. Madrid, 2, 3 y 4 de junio de 2005. ISBN: 84-931709-5-X.

Capítulos de libros

  1. MARTÍ, J.V.; ALCALÁ, J.; GARCÍA-SEGURA, T.; YEPES, V. (2017). Heuristic design of a precast-prestressed concrete U-beam and post-tensioned cast-in-place concrete slab road bridges. High Performance and Optimum Design of Structures and Materials II, Cap. 2, pp. 17-38. Editorial WIT Press, año 2016. ISBN 978-1-78466-143-4.
  2. GONZÁLEZ-VIDOSA, F.; YEPES, V.; ALCALÁ, J.; CARRERA, M.A.; PEREA, C.; PAYÁ, I.J. Optimization of reinforced concrete road structures by simulated annealing. Simulated Annealing, Cap. 5, pp- 307-320. Editorial: I-Tech Education and Publishing, año 2008. ISBN 978-953-7619-07-7.

Participación en proyectos de investigación subvencionados

Tesis doctorales dirigidas

Multicriteria 0ptimization for sustainable design of post-tensioned concrete slab bridges using metamodels
Lorena Yepes Bellever
Fecha de lectura: 06/06/2025
Director: Alcalá-González, Julián

Optimal design of socially and environmentally efficient reinforced concrete precast modular road frames under constrained budgets
Andrés Ruiz Vélez
Fecha de lectura: 04/12/2024
Directores: Yepes, V.; Alcalá-González, Julián

Life cycle optimization analysis of bridge sustainable development
Zhiwu Zhou
Fecha de lectura: 13/01/2023
Directores: Yepes, V.; Alcalá-González, Julián

Optimización heurística de forjados de losa postesa
Angel Manuel Rodríguez-Calderita Facundi
Fecha de lectura: 09/12/2015
Directores: Yepes, V.; Alcalá-González, Julián

Patentes

VIGA EN CAJÓN MIXTA ACERO-HORMIGÓN
Autores: Alcalá González, Julián; Navarro Ferrer, Ferran
Referencia: P202030530
Fecha registro nacional: 04/06/2020

Otras actividades de investigación y divulgación

Tecnología e investigación en edificación 2015
FERIA DE VALENCIA EXCO/CEVISAMA. FMI
Fecha inicio: 11/02/2015 Fecha fin: 13/02/2015
Autores: Referencia: David Llacer, Enrique; Yepes, V.; Rodríguez-Calderita-Facundi, Ángel Manuel; Alcalá González, Julián

Experiencia profesional

Entre 1991 y 2002, colaboraciones con AMINSA (Agrupación Mediterránea de Ingeniería S.A.) en la redacción de los siguientes proyectos:

y en las Asistencias Técnicas a la Dirección de las siguientes obras:

Desde 2002 hasta la actualidad, participa en los siguientes proyectos trabajado por cuenta propia:

Año 2003

Año 2004

Año 2005

Año 2006

Año 2007

Año 2008

Año 2009

Año 2010

Año 2011

Año 2012

Año 2013

Año 2014

Año 2015

Año 2019

Servicios prestados desde la Universitat Politècnica de Valencia:

Año 2014

Año 2015

Año 2016

Año 2017

Año 2018

Año 2019

Año 2020

Año 2021

Año 2022

Año 2023

Año 2024

Año 2025

Otros Méritos

Colegio de Ingenieros de Caminos, Canales y Puertos : Colegiado nº 11.691
Miembro de la Asociación de Ingenieros de Caminos, Canales y Puertos y de la Ingeniería Civil
Miembro personal de la Asociación Española de Ingeniería Estructural (ACHE)

Otros cursos y seminarios impartidos

Cursos del ICE Instituto de Ciencias de la Educación · UPV

Programa PRAKTIKUM Programa de talleres de verano para estudiantes de Bachillerato organizado por la UPV